Diagnosing a Clog in the Kiosk II
customer
kiWhat I normally do is to try to isolate the issue from several possibilities to one. The only way to do that is to swap dampers. Follow these instructions to see if it is the damper or the print-head. Perform a nozzle check, and note the bad nozzle check and...
Setting up Your DTG Kiosk Checklist
customer
Download the DTG Quick Set Up Guide Also, try downloading the DTG Kiosk BASICS Manual Start to Finish List of Setting Up Your DTG Kiosk (1) Inspect carton for damages. (2) Open carton. (3) Remove top cardboard and set aside. DO ONT DISCARD ANY PACKING MATERIALS (4) Inspect to make...
Upgrade your EKPrint Studio RIP Software for Anajet Sprint, FP125 and Melcojet
customer
If you bought a used Anajet Sprint, Anajet FP-125 or Melco Jet, it may have come with old, outdated software. It also might not work after install on your computer because it actually needs a EKPrint Studio License Transfer. Who woulda thunk..... You will need to contact http://www.eukondigital.com/transfer The upgrade...
Learn How to Make Your Garment Printing Look Like Screen Print
Paul Boody
Ever wondered how to give your DTG prints that screen print look and feel? Well, you're in for a treat! We'll guide you through the simple steps in Photoshop, making it a breeze to infuse your prints with the allure of top-notch screen prints.
Quick ROI Breakdown on Direct to Garment Printers
Paul Boody
Thinking about creating with Direct to Garment Printers? Check out our breakdown on the Return on Investment on garment printers.
Pretreating and Curing the Pretreatment for 100% Black Polyester Printing
Paul Boody
Check out these practical tips – from giving enough pretreatment to using hover curing techniques and fine-tuning white ink application. Learn why nailing the curing process is crucial to avoid durability issues after washing. This guide dives into polyester-specific challenges, ensuring your prints shine and your business thrives.
Printer Warranties and Third Party Ink
customer
Discover the legality and protection provided by the Magnuson-Moss Warranty Improvement Act when it comes to using third-party inks for your garment printer.
Testing Pretreatment on Different Shirts
Paul Boody
Looking to achieve optimal white ink prints? Check out this helpful guide to ease the process. Whether you're hands-on with a Wagner sprayer or exploring the features of an automatic pretreatment machine like the Peal PTM, experimenting with different pretreatments and shirt types is the key to optimal results.
DTG Garment Printer Machine Maintenance Bible
Paul Boody
Achieve a seamless and positive experience with your machine by adhering to simple rules and dedicating just five minutes daily. This routine ensures a content machine, satisfied customers, visually appealing prints, reduced need for head replacements, and an overall enjoyable experience.
Epson 4880 Based Garment Printer Error 1001D
customer
The 1001D error is normally generated on an Epson 4880 printer because the carriage motor is reporting an incorrect voltage being applied to the motor. There are several instances that can cause this. If the print head carriage assembly is obstructed in some way (problem with capping assembly possibly) it...
Brother GT-381 GT-361 GT-341 Cover Removal
Dean Armando
Removing the Rear Cover (1) With the power on, eject the platen so it not partially in the rear cover. (2) Power off the machine and remove the power cord from the back of the printer. (3) Use a long Phillips Screwdriver to remove teh single Phillips screw on the...
White Color Alignment on the Brother GT3
customer
This procedure is used as a possible remedy for misalignment issues with the CMYK ink not covering the white ink properly. A CR Origin Set may have to be performed if the results of this test are not satisfactory. If the printer was moved, even rolled across the room, the CR...