Automate precision cutting and finishing for DTF film, stickers, decals, heat-transfer media and short-run printed graphics. The STS C3135 Flatbed Cutter combines a CCD camera, registration-mark/QR-code recognition, roll-media feeding and vacuum media hold-down to help busy print shops reduce hand trimming and move from printed output to clean, repeatable finished work.
CCD camera positioningIntelligent edge detection and mark scanning support accurate contour-cut workflows.
QR-code job recognitionIdentify multiple jobs and mixed-material work from compatible roll-fed media.
Vacuum hold-down + anti-static feedingHelps stabilize sheets and film during the cutting process.
Cut, score and perforateBlade, pen and scoring-pen options expand finishing possibilities.
See the STS C3135 Flatbed Cutter in Action
▶ Watch the STS C3135 Demonstration Video
Watch the cutter and its production workflow before exploring specifications. Actual media suitability and finishing results depend on job setup, material and tooling.
What the C3135 Can Do for Your Print Shop
Manual cutting ties up operators and can introduce inconsistent edges. The C3135 is a dedicated finishing machine for workflows that need more accurate, repeatable contour cutting, straight cuts, perforation and compatible scoring tasks. Its camera-assisted registration helps align cutting paths with printed artwork, while the friction-feed system accommodates compatible roll-fed media.
DTF transfer productionFinish compatible PET heat-transfer film and separate printed graphics for production or fulfillment.
Sticker and decal shopsContour cut compatible adhesive vinyl and sticker materials into individual shapes.
Short-run labels and packagingProcess supported coated paper, kraft paper and lightweight cardboard for sample and finishing applications.
Print-and-cut workflowsUse camera marks and QR recognition to reduce manual job selection and alignment steps where supported.
Designed for Production Efficiency
- Cutting area: Up to 900 × 800 mm (35.43 × 31.50 in).
- Adjustable cutting speed: 10–700 mm/s, depending on settings and media.
- Adjustable cutting force: 0–750 g for compatible tools and media.
- Repeat precision: Manufacturer-rated ≤ 0.05 mm under appropriate conditions.
- Touchscreen: 10-inch capacitive control panel.
- Controls and communication: USB, LAN, Wi-Fi and U-disk support.
- Mobility: Space-saving foldable design for installation, transport and storage planning.
Materials and Applications
STS lists PET heat-transfer film, self-adhesive vinyl, sticker stock, coated paper, kraft paper and cardboard among supported applications. Material thickness, backing, adhesive, stiffness and tooling determine actual performance. Confirm your exact substrate, finish and production volume with GPI Supplies before ordering.
How the Workflow Works
- Prepare your artwork. Set up print and cutting paths using the supported software workflow and registration marks or job codes as required.
- Print and load material. Feed the compatible sheet or roll media and secure it with the vacuum hold-down system.
- Scan and register. The CCD camera reads supported registration marks or QR codes to help identify and position jobs.
- Finish the job. Choose appropriate tooling, pressure and speed for contour cutting, perforation or compatible scoring applications.
- Inspect and collect. Check cut depth and registration on test material before full production.
STS C3135 Technical Specifications
| Manufacturer / model | STS C3135 Flatbed Cutter Machine |
|---|---|
| SKU | STSC3135 |
| Cutting drive | High-power brushless servo motor |
| Positioning | CCD digital camera; mark or QR-code scanning |
| Tool holders / tools | 1 holder; blade, pen or scoring pen |
| Control | 10-inch capacitive touchscreen |
| Media holding / feeding | Vacuum suction / friction feed; anti-static board |
| Maximum cutting size | 900 × 800 mm (35.43 × 31.50 in) |
| Cutting speed | 10–700 mm/s |
| Cutting force | 0–750 g |
| Maximum listed paper weight | Up to 400 g; material-dependent |
| Maximum feed roll width | 600 mm (23.62 in) |
| Maximum feed roll diameter | 200 mm (7.87 in) |
| Repeat precision | ≤ 0.05 mm |
| Memory | 128 MB |
| Connectivity | USB, LAN, Wi-Fi, U disk |
| Listed software | CutStudio, CorelDRAW and Adobe Illustrator plug-in; confirm versions and supplied licenses |
| Machine power | Maximum 350 W (separate vacuum pump electrical requirements apply) |
| Power options | 110–120 VAC, 50/60 Hz, max 6.8 A; or 220–240 VAC, 50/60 Hz, max 3.4 A |
| Environment | 41–95°F (5–35°C); 30–75% RH, non-condensing |
| Machine dimensions | 1650 × 1130 × 1020 mm (64.96 × 44.49 × 40.49 in) |
| Crated dimensions | 1760 × 1450 × 620 mm (69.29 × 57.09 × 24.41 in) |
| Net / gross weight | 176 ± 5 kg / 276 ± 5 kg |
Technical specifications are manufacturer-published and may be revised. Confirm electrical service, vacuum-pump requirements, rigging, delivery access, accessories and installed software prior to purchase.
Frequently Asked Questions
What is the STS C3135 primarily used for?
It is a professional flatbed finishing cutter for compatible printed PET films, sticker/adhesive vinyl, coated paper, kraft paper, cardboard and related media. It supports contour-cut, perforation and compatible scoring workflows.
Can it work with printed DTF film?
STS lists PET heat-transfer film as a supported material category. Send us your film specifications and the cut result you need so we can verify the appropriate tooling and workflow.
Does it recognize multiple print jobs?
Yes. The manufacturer describes QR-code recognition for automatic detection of multiple jobs and mixed-material cutting on supported roll-fed media.
How large can it cut?
The maximum published cutting size is 900 × 800 mm (approximately 35.43 × 31.50 in). The listed maximum feed roll width is 600 mm, which is a separate specification.
What software does it use?
STS lists CutStudio, CorelDRAW and an Illustrator plug-in. Compatibility, versions, workflow setup and included licenses should be confirmed with GPI before ordering.
Does this machine require special shipping or electrical service?
It is heavy industrial equipment with a manufacturer-listed gross shipping weight of approximately 276 kg. Verify freight receiving, installation space, voltage and the separate vacuum-pump electrical requirements before purchase.
Is it a printer?
No. The C3135 is a cutting and finishing machine intended to process suitable materials, including printed output from compatible production workflows. Printing equipment is sold separately unless explicitly listed in a bundle.
Planning Your C3135 Purchase with GPI Supplies
Our team can help evaluate your preferred film or media, cutter workflow, shop footprint, delivery requirements and whether the C3135 is a fit for your existing DTF, sticker or wide-format production setup. For a commercial equipment purchase, confirm stock, freight, training, warranty and any accessories before placing your order.
STS C3135 Flatbed Cutter Machine
Precision cutting, contour finishing and automated media recognition for modern print shops.
Applicable Materials
Materials the STS C3135 Can Cut
The STS C3135 Flatbed Cutter is designed for print shops, DTF production teams, sticker makers and finishing departments that need accurate cutting across a range of flexible and sheet-based materials.
Heat Transfer & Film Media
Ideal for finishing PET heat transfer film, hot film and similar transfer materials used in custom apparel, DTF production and decorated product workflows.
- PET heat transfer film
- Hot film
- Transfer film materials
- Lightweight flexible film media
Sticker, Decal & Adhesive Media
A strong fit for shops producing stickers, decals, labels and adhesive-backed graphics that require clean contour cutting and repeatable results.
- Sticker media
- Self-adhesive vinyl
- Printed decals
- Label and adhesive-backed graphics
Paper & Packaging Materials
Useful for cutting and scoring paper-based materials, packaging samples, short-run graphics and lightweight display or presentation materials.
- Coated paper
- Kraft paper
- Cardboard
- Lightweight packaging materials
Print Finishing Applications
Built to support accurate finishing after print, especially when jobs require contour cutting, perforation, QR code recognition or camera-based positioning.
- Contour cutting
- Perforation cutting
- Sticker sheet finishing
- Printed graphic trimming
- Short-run packaging samples
Not sure if your material is compatible?
Material performance can vary based on thickness, backing, coating, surface finish and cutting settings. Contact GPI Supplies before ordering to confirm whether the STS C3135 is the right fit for your production workflow.
Built for Smarter Print Finishing
Camera detection and QR code recognition help streamline repeat production.
Best-Fit Applications
Ideal for shops adding automated cutting to printed product workflows.
Why Buy Your STS Equipment from GPI Supplies?
Get the right equipment, supplies and support for your production workflow.
Machine Specifications
STS C3135 Flatbed Cutter Technical Specs
Review the key cutting, software, power and machine specifications for the STS C3135. This section is designed to help you quickly confirm whether the machine fits your shop’s workflow, material needs and production setup.
900 x 800 mm
Maximum cutting size
0 to 750 g
Cutting force
10 to 700 mm/s
Cutting speed
≤ 0.05 mm
Repeat precision
Cutting System
Core machine components for cutting, positioning and tool control.
| Cutting Control System | High-power brushless servo motor |
|---|---|
| Positioning Sensor | Digital Camera, CCD |
| Control Panel | 10-inch capacitive touchscreen |
| Tool Holders | 1 tool holder |
| Supported Tools | Blade, pen and scoring pen |
Machine Performance
Cutting capacity, media handling and production accuracy.
| Media Hold Method | Vacuum suction |
|---|---|
| Scanning Code Type | Mark or QR code |
| Maximum Cutting Size | 900 x 800 mm | 35.43 x 31.50 in |
| Scanning Speed | Approximately 5 seconds |
| Cutting Speed | 10 to 700 mm/s | 0.39 to 27.6 in/s |
| Cutting Force | 0 to 750 g | 0 to 1.65 lb of force |
| Maximum Paper Weight | Up to 400 g, varies by material |
| Sheet Feeding Method | Friction feed |
| Maximum Feed Roll Diameter | 200 mm | 7.87 in |
| Maximum Feed Roll Width | 600 mm | 23.62 in |
| Sheet Feeding Speed | 100 to 600 |
| Minimum Character Cutting Size | Approximately 10 mm², varies by contour pattern and media |
| Internal Storage | 128M memory for storing cutting files |
| Mechanical Resolution | 0.02 mm | 0.00079 in |
| Programmable Resolution | HPGL 0.025 mm | HPGL 0.00984 in |
| Repeat Precision | ≤ 0.05 mm | ≤ 0.00197 in |
Software & Connectivity
Connection options and supported design software workflows.
| Connectivity | USB, LAN, WiFi and U disk |
|---|---|
| Software Compatibility | CutStudio, CorelDRAW and Illustrator plug-in |
Power & Operating Environment
Power, vacuum pump and recommended working conditions.
| Working Voltage & Current |
110VAC to 120VAC, 50/60Hz, maximum current 6.8A 220VAC to 240VAC, 50/60Hz, maximum current 3.4A |
|---|---|
| Working Power | Maximum 350W |
| Vacuum Pump Voltage & Current |
110VAC, 50Hz, rated current 10.8A 110VAC, 60Hz, rated current 13A 220VAC, 50Hz, rated current 4.5A 220VAC, 60Hz, rated current 5.6A |
| Air Pump Vacuum Power |
110VAC, 50Hz, 0.75KW 110VAC, 60Hz, 0.84KW 220VAC, 50Hz, 0.75KW 220VAC, 60Hz, 0.83KW |
| Operating Temperature | +5°C to +35°C | 41°F to 95°F |
| Operating Humidity | 30% to 75% RH, non-condensing |
Dimensions & Weight
Machine footprint, packaged dimensions and freight planning details.
| Machine Dimensions | 1650 x 1130 x 1020 mm | 64.96 x 44.49 x 40.49 in |
|---|---|
| Package Dimensions | 1760 x 1450 x 620 mm | 69.29 x 57.09 x 24.41 in |
| Gross / Net Weight | 276 ± 5 kg / 176 ± 5 kg | 608.47 ± 11.02 lb / 388.01 ± 11.02 lb |
Specifications are subject to change without notice. Please confirm current configuration, power requirements, freight details and material compatibility before purchase.
[nerdy-form:16962]
YOUR CART
Free Same Day Shipping On All Supplies!
Loading...
Loading form...