Keencut Excalibur 3S | 63" Cutter

• 100 medium-duty utility blades
• Twin wheel cutter
• Spare sightline strip

Rigid Materials

• Aluminium composite panel e.g. Dibond ≤ 4mm (1/8″)
• Steel composite panel e.g. Multishield ≤ 3mm (3/32″)
• V-grooves Dibond ≤ 3mm (3/32″) with optional SteelTrak v-groover
• MDF ≤ 3mm (3/32″)
• Cast acrylic / Plexiglas (scoring only) ≤ 3mm (3/32″)
• Glass ≤ 6mm (1/4″) with optional glass cutting kit (Product code: STGLC)

Semi-Rigid Materials

• PVC foamboard ≤ 13mm (1/2″)
• Corrugated/fluted plastic ≤ 13mm (1/2″)
• Corrugated cardboard ≤ 13mm (1/2″)
• Foam centred board ≤ 13mm (1/2″)
• Mountboard ≤ 6mm (1/4″)
• Aluminium sheet ≤ 1mm (1/25″) with optional cutting head (Product code: STALC)

The Excalibur 3S is suited to the regular cutting of light and medium-weight boards and can also cut tough materials, including 3mm (3/32″) aluminum composite panels.

Accuracy is assured with a clear sightline strip acting as your guide to precise alignment. A one-piece horizontal squaring arm ensures positioning and rigidity either side of the cut line. Once aligned, materials are held firmly by a unique pressure-sensitive clamp, which is designed to protect delicate surfaces from damage.

Blades are securely mounted within the cutter head and fitted with a safety lock so all of the blades automatically disengage when not in use. When in operation, the Excalibur 3S creates no distracting noise and no dust.

The Excalibur 3S has been designed for quick setup, reducing downtime. Cutting and scoring tools are permanently fitted for immediate engagement, and quick set production stops can be adjusted rapidly to provide consistent high production runs or one-off cutting.

The vertical design utilizes body weight to minimize the effort needed to cut tough materials. There is no need for electric power. The upright cutting position and the low friction bearing system combine to reduce user fatigue, while telescopic legs can be fixed at the most comfortable working height.

The option for wall mounting saves workshop space, but for those with limited wall space or requiring more flexibility, a free-standing kit is available.

The lower cutter uses off-the-shelf blades, so no costly specialist blades are required. The twin wheel cutters' circular blades are made of high-grade tool steel.

The Excalibur 3S will cut a wide variety of materials. The twin wheel cutter tackles tougher materials, including aluminum composite panels (e.g. DiBond) and MDF up to 3mm (3/32″), producing a clean, safe edge in a single pass.

By manufacturing in-house, with only the highest quality materials, Keencut can guarantee that the Excalibur 3S will provide reliable long-lasting, and accurate service. All Keencut products are offered with a comprehensive five-year guarantee. Register your product to activate your guarantee.