AlbaChem DFR Direct to Film Remover No. 2020 - 20 oz

Remove DTF Graphics and Reprint the Garment

AlbaChem DFR Direct to Film Remover is formulated to remove direct-to-film (DTF) graphics from textiles. Its solvent blend attacks the DTF binder so the printed graphic can be peeled or carefully scraped away.

• Removes DTF graphics from textiles
• Low-odor formula
• Water soluble
• 20 fl. oz. (591 mL) bottle with Yorker-style application spout
• Manufacturer item number: 2020

How to Use

1. Apply DFR to the underside of the fabric beneath the print area to be removed.
2. Allow the remover to penetrate for approximately 1–5 minutes; AlbaChem recommends at least 3 minutes for best results.
3. Gently peel or scrape away the DTF graphic. Apply additional remover to the top of the print if needed.
4. Use additional DFR on a clean textured cloth to remove remaining residue.
5. Rinse thoroughly with water, wash the garment, and allow it to dry completely before reprinting.

Packaging: 20 fl. oz. (591 mL) per bottle. Manufacturer case pack: 12 bottles.

Consult the current AlbaChem Safety Data Sheet and Technical Data Sheet for handling, storage, and safety information.