How do I load a design?

Osman Bayrak

Question: How do I load a design?

Answer:
Using the STANDARD Controller:

  1. Insert the design disk into the floppy disk drive
  2. Press the EMB.CALL button
  3. Press the DOWN button to access the FDD CALL command
  4. Press the SET button
  5. The machine will display all of designs located on the floppy disk
  6. Scroll to the desired design name by using the UP or DOWN button
  7. Press the SET button
  8. The line SELECT EMPTY ROOM will appear on the screen followed by a number.
  9. Unless a change is necessary, press the SET button
  10. Press the PREVIOUS button twice
  11. Your design is loaded into memory


Using the LCD Controller:

  1. Insert the design disk into the floppy disk drive
  2. Press the INPUT button (F1)
  3. Press the FLOPPY button (F1)
  4. Press the UP ARROW button (F1) or the DOWN ARROW button (F2) to highlight the desired design
  5. Press the COPY button
  6. Unless a change is necessary, press the SELECT button (F7)
  7. Press the PREVIOUS button (F8)