To Recalibrate the Print Head Drive Board Voltages, in the <diagnostics> Menu under the Print Head tab select Calibrate Head Voltages. If the Print Head Driver Board fails to calibrate, repeat a maximum of 5 times. If the boards are unable to calibrate, contact AnaJet Technical Support.
Recent Articles
xTool O1 Omni Accessories Guide: OR1, RF1, LM1, BatchFlow Jig & Mats
Subscribe to Media Posts
Recommended for You
Save
$250
$250
From$2,249.00 |
$2,249.00 | $2,499.00
Save
$70
$70
$828.00 | $898.00
DTF Transfer Size Chart & Placement Guide for Shirts & Hoodies
Subscribe to Media Posts
Recommended for You
Prestige DTF Printer Maintenance Guide: Daily, Weekly and Long-Term Care
Subscribe to Media Posts
Recommended for You
From
$8,745.00
From
$29,957.19
From
$19,362.42
From
$20,365.25
From
$22,265.25
From